收藏本站

DS21352DK
BASIC OPERATION
This design kit relies upon several supporting files, which can be downloaded from our website at
www.maxim-ic.com/DS21352DK . See the DS21352DK QuickView data sheet for these files.
Hardware Configuration
Using the DK101 processor board:
? Connect the daughter card to the DK101 processor board.
? Supply 3.3V to the banana-plug receptacles marked GND and VCC_3.3V. (The external 5V connector and the
?
?
TIM 5V supply headers are unused.)
All processor board DIP switch settings should be in the ON position with exception for the flash programming
switch, which should be OFF.
From the Programs menu, launch the host application named ChipView.exe. Run the ChipView application. If
the default installation options were used, click the Start button on the Windows toolbar and select
Programs → ChipView → ChipView.
Using the DK2000 processor board:
? Connect the daughter card to the DK2000 processor board.
? Connect J1 to the power supply that is delivered with the kit. Alternately, a PC power supply can be connected
?
to connector J2.
From the Programs menu, launch the host application named ChipView.exe. Run the ChipView application. If
the default installation options were used, click the Start button on the Windows toolbar and select
Programs → ChipView → ChipView.
General:
? Upon power-up the RLOS LED is lit, as well as the MCLK-2.048MHz and TCLK-2.048MHz LEDs.
Quick Setup (Demo Mode)
?
?
?
The PC loads the program, offering a choice among Demo Mode, Register View, and Terminal Mode. Select
Demo Mode.
The program requests a configuration file, then select DS21352DK_DRVR.cfg.
The Demo Mode screen appears. Upon external loopback, the LOS and OOF indicators extinguish.
Quick Setup (Register View)
?
?
?
?
The PC loads the program, offering a choice among Demo Mode, Register View, and Terminal Mode. Select
Register View.
The program requests a definition file, then select DS21352.def.
The Register View screen appears, showing the register names, acronyms, and values. Note: During th
edefinition file load process, all registers are initialized according to the init value filed in the definition file
(because the SETUP field in the .def file is turned on).
Predefined register settings for several functions are available as initialization files.
? INI files are loaded by selecting the menu File → Reg Ini File → Load Ini File.
? Load the INI file DS21352t1_b8zs_esf.ini.
? After loading the INI file the following may be observed:
The RLOS LED extinguishes upon external loopback.
The device is now configured for T1 B8ZS ESF.
Miscellaneous:
? Clock frequencies and certain pin bias levels are provided by a register-mapped CPLD, which is on the
?
?
DS21352 daughter card.
The definition file for this CPLD is named DS215x_35x_CPLD_V2.def. See the CPLD Register Map section for
definitions.
All files referenced above are available for download in the section marked “File Locations.”
4 of 21
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
DS21354DK KIT DESIGN FOR DS21354
DS21458DK KIT DESIGN FOR G511DS21458
DS2156DK KIT DESIGN FOR DS2156
DS21Q348DK KIT DESIGN FOR DS21Q348
DS21Q55DK KIT DESIGN FOR DS21Q55
DS2436K KIT DEMO BATT ID/MON CHIP DS2436
DS2438K KIT DEMO SMART BATT MON DS2438
DS26303DK KIT DESIGN FOR DS26303
相关代理商/技术参数
DS21352G 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352GN 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352L 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352L+ 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352LB 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352LB+ 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352LBN 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS21352L-C02 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray